Hebei FeiXiang Roll Forming Machinery Co.,Ltd

Sales & Support Mail: tpcosteel@163.com
Select Language

Roof Pannel Forming Machine (28-220-1100)

Roof Pannel Forming Machine (28-220-1100)

Roof Pannel Forming Machine (28-220-1100)

 1. Leak frame load-bearing: 5T 

2. Rack: Welding with 350H steel 
3. The form of forming machine guiding filling: Side skip  cold roll forming machine 
4. The form of forming machine: Chain drive with wallboard type, the thickness of wallboard is 14mm. 
5. Diameter of Shaft is: 72mm 
6. Chain: 1 inch single row cold forming machine
7. Main motor power: 4kw reduction box 
8. Forming Speed: 1.5m/min 
9. Number of tracks: 12 tracks 
10. Roller material: High grade 45#steel 
11. Hydraulic station power: 3kw 
12. Hydraulic station oil pump: Gearpump 
13. Cutting type: Hydraulic cut Roll forming machine Roll former Roll forming
14. Forming Cutting blade: Cr12 
15. Heat treatment on cutting blade: HRC58° -60° 
16. Thickness of coil sheet: 0.3-0.8mm 
17. Coil width of material: 1000mm cold roll forming
18. Index error of length: ± 2mm 
19. Controlling system: PLC 
20. Voltage: 380V 3phase 60 Hz or at buyer's requirement.Carbon steel pipe|

Stainless steel pipe
Suitable material color steel sheet
Thickness of raw material 0.5—0.6mm
Yield strength of material 235Mpa
Working Speed about 2000-3000mm/min
Step distance adjustable according to requirement (>=250mm)
Power Requirement Main motor power: 5.5Kw (Depend on final design)
Hydraulic station power: 5.5Kw (Depend on final design)
Uncoiler's loading capacity Max. Capacity: 5000kgs (can be increased to be 10T)
Controlling system Mitsubishi PLC & converter
Machine's size about 18m×1.5m× 1.4m (Depend on final design)






上一篇:Roof Panel Sheet Roll Forming Machine




Your E-mail:



HeBei FeiXiang Roll Forming Machineryco.,ltd

Contact Person: Mr. Lianxing.Xu

  E-mail:  contact by email tpcosteel@163.com

2009-2010 http://www.coldrollformingmachine.org . All Rights Reserved. Roll forming machine, roll former
 pipe fitting